人非神經元性烯醇化酶（NNE）ELISA試劑盒深圳子科生物提供的ELISA試劑盒產品經過實驗技術人員多年的研發經驗積累可以檢測多種標本，參數指標齊全，并可提供準確的數據分析，我公司并代理各大進口原裝試劑盒，提供品牌有：美國RD、RB、Sigma、TSZ、Cloud-clone corp、MP、 Sciencell、Immonoway、ABI，IBL等等，并提供分子生物學檢測試劑盒、免疫學檢測試劑盒、金標法檢測試劑盒、各品牌*抗體抗原、標準對照品、細胞菌株、生物培養基、生化試劑、實驗耗材等等多門類上萬種科研產品，歡迎您！

人非神經元性烯醇化酶（NNE）ELISA試劑盒

Assay procedure

1.  Prepare all reagents before starting assay procedure. It is recommended that all Standards and Samples be added in duplicate to the Microelisa Stripplate.

2.  Add standard: Set Standard wells, testing sample wells. Add standard 50μl to standard well.

3.  Add Sample: Add testing sample 10μl then add Sample Diluent 40μl to testing sample well; Blank well doesn’t add anyting.

4.  Add 100μl of HRP-conjugate reagent to each well, cover with an adhesive strip and incubate for 60 minutes at 37°C. 

5.  Aspirate each well and wash, repeating the process four times for a total of five washes. Wash by filling each well with Wash Solution (400μl) using a squirt bottle, manifold dispenser or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Solution by aspirating or decanting. Invert the plate and blot it against clean paper towels.

6.  Add chromogen solution A 50μl and chromogen solution B 50μl to each well. Gently mix and incubate for 15 minutes at 37°C. Protect from light.

7.  Add 50μl Stop Solution to each well. The color in the wells should change from blue to yellow. If the color in the wells is green or the color change does not

appear uniform, gently tap the plate to ensure thorough mixing.

8.  Read the Optical Density (O.D.) at 450 nm using a microtiter plate reader within 15 minutes.

人非神經元性烯醇化酶（NNE）ELISA試劑盒Calculation of results

• This standard curve is used to determine the amount in an unknown sample. The standard curve is generated by plotting the average O.D. (450 nm) obtained for each of the six standard concentrations on the vertical (Y) axis versus the corresponding concentration on the horizontal (X) axis.
• First, calculate the mean O.D. value for each standard and sample. All O.D. values, are subtracted by the mean value of the zero standard before result interpretation. Construct the standard curve using graph paper or statistical software.
• To determine the amount in each sample, first locate the O.D. value on the Y-axis and extend a horizontal line to the standard curve. At the point of intersection, draw a vertical line to the X-axis and read the corresponding concentration.
• Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
• The sensitivity by this assay is 10.0 pg/ml
• Standard curve

Storage：  2-8℃.

validity： six months.

血清移液管        1ml獨立包裝血清移液管,滅菌    300支/盒,1800支/箱
        2ml獨立包裝血清移液管,滅菌    300支/盒,1800支/箱
        5ml獨立包裝血清移液管,滅菌    200支/盒,1200支/箱
        10ml獨立包裝血清移液管,滅菌    200支/盒,1200支/箱
        25ml獨立包裝血清移液管,滅菌    100支/盒,600支/箱
        50ml獨立包裝血清移液管,滅菌    100支/盒,600支/箱
巴氏吸管        3ml吸管，加長，單支包裝（紙塑包袋）,滅菌    200支/盒，8盒/箱
電泳加樣吸頭        10-200ul電泳加樣吸頭,袋裝    1000支/包,10包/箱
        10-200ul電泳加樣吸頭,盒裝    96支/盒,50盒/箱